Roofing Tile Roll Forming Machine

Features
1. The roofing tile roll forming machine includes an uncoiler, roll forming unit, pressing unit and cutting unit.
2. The material thickness can be formed at 0.3-0.8mm.
3. Because of the pressing mold, the whole line speed of the roofing tile roll forming machine is about 6 m/min.
4. All the parts of the roofing tile roll forming machine are automatically controlled by PLC.

Application
The products of the roofing tile roll forming machine are used as the roofing sheets of houses, factories, warehouses, garages, exhibition centers, cinemas, gardens, etc.

Flow Chart

1. Uncoiler
2. Material inlet
3. Pre-cutting device
4. Roll forming machine
5. Pressing unit
6. Cutting device
7. Product run out table

Technical Specifications

Model	YD-1020L
Number of Stations	18 stations
Thickness	0.3-0.8mm
Main Power	7.5Kw
Dimensions	Appro×9m*1.4m*1.2m
Forming Speed	5-10m/min
After Forming	45# forge steel

Dimension Chart

Configurations
The roofing tile roll forming machine consists of a passive or hydraulic single or double head uncoiler, roll forming machine unit, hydraulic automatic cutting unit, PLC automatic control cabinet, product run out table, and pressing unit.

Materials

Model	YD-1020L
Decoiler Material	# 45 Steel Material
Roll Forming Material	#45 Steel base / 40CR Steel HRC 48-52 Roller
Cutting Material	Cr12 Quenched 58-62
Punching Material	Cr12 Quenched 58-62 or Cr15 Bearing Steel
PLC	PLC Panasonic →Touch screen Made in Taiwan → Transducer Yaskawa →Encoder Omron
Bearing	National Brand

Equipment Maintenance
Meticulous daily maintenance plays an important part in extending the roofing tile roll forming machine's operation time and the quality of the rolling plank. The following steps should be part of the machine's daily production and usage routine.
1. Regularly lubricate the outside parts of the roofing tile roll forming machine, i.e., driving chain, etc.
2. Regularly wipe the surface of roller, particularly when working outside. If you do not use the machine a long time of time, you should daub lube in the roller surface. Make sure you clean it the next time you use the machine.
3. If the roofing tile roll forming machine is not used for a long period of time, make sure you cover it with plastic or cloth. Avoid getting rain on the machine or the machine becoming damp, especially the electric control box.
4. Make sure the cutting system is lubricated when necessary.
5. Check the hydraulic station often and the oil quantity of the deceleration machines. Add more oil if the oil level is low.
6. Check the electric appliances box and every leads conjunction circumstance of the roofing tile roll forming machine. Dust the machine often.

Packaging
The roofing tile roll forming machine is wrapped and covered with film making the package seaworthy. The legs of the machine are fixed with angle steel and heavy screws.