Square Pipe Roll Forming Machine

Features
1. The square pipe roll forming machine is easy to form square pipes.
2. The high quality square pipe roll forming machine is fully automatic and easy to control
3. The thickness of the square pipes can normally be formed at 1.0-2.0mm.
4. The whole line speed of the square pipe roll forming machine can be reached at 40m/min or more.
5. If you need higher efficiency, we recommend you use the flying shear with no-stop.

Application
The products of the square pipe roll forming machine can be used as shelves in any industry.

Flow Chart
1. Electric uncoiler
2. Leveling device
3. Material inlet
4. Punching equipment
5. Roll forming machine
6. Pressing equipment
7. Flying tracking cutting
8. Product run out table
9. Square Pipe Roll Forming Machine
Technical Specifications

Model	57-38
Number of Stations	26 Stations
Thickness	1.5-2.0
Main Power	18.5Kw
Dimensions	9.0m*1.4m*1.2m
Forming Speed	12-16m/min
After forming	57mm

Dimension Chart

Configurations
The square pipe roll forming machine consists of a passive or hydraulic uncoiler, flying tracking cutting, servo motor, roll forming unit, PLC automatic control cabinet and product run out table.

Materials

Model	YD-Square pipe
Decoiler Material	# 45 Steel Material
Roll Forming Material	#45 Steel base / 40CR Steel HRC 48-52 Roller
Cutting Material	Cr12 Quenched 58-62
Punching Material	Cr12 Quenched 58-62 or Cr15 Bearing Steel
PLC	PLC Panasonic →Touch screen Made in Taiwan → Transducer Yaskawa →Encoder Omron
Bearing	National Brand

Equipment Maintenance
Meticulous daily maintenance plays an important part in extending the square pipe roll forming machine's operation time and the quality of the rolling plank. The following steps should be part of the machine's daily production and usage routine.
1. Regularly lubricate the outside parts of the square pipe roll forming machine, i.e., driving chain, etc.
2. Regularly wipe the surface of roller, particularly when working outside. If you do not use the machine a long time of time, you should daub lube in the roller surface. Make sure you clean it the next time you use the machine.
3. If the square pipe roll forming machine is not used for a long period of time, make sure you cover it with plastic or cloth. Avoid getting rain on the machine or the machine becoming damp, especially the electric control box.
4. Make sure the cutting system is lubricated when necessary.
5. Check the hydraulic station often and the oil quantity of the deceleration machines. Add more oil if the oil level is low.
6. Check the electric appliances box and every leads conjunction circumstance of the square pipe roll forming machine. Dust the machine often.

Packaging
The square pipe roll forming machine is wrapped and covered with film making the package seaworthy. The legs of the machine are fixed with angle steel and heavy screws.